Click on the pictures to see supersized images.




Serial Number 00089 is complete. It is a Titlist Conversion Cue. That means the two piece cue was made from an original World War II era Brunswick-Balke-Collender Willie Hoppe Titlist house cue. The body is rosewood. The forearm is straight grained maple with four full spliced rosewood points. Each point has four veneers. The forearm is stamped with the original Willie Hoppe stamp and the original 18 ounce weight stamps. The points have the traditional early Titlist veneers: maple, mahogany, pale green and purple. The butt cap is double black linen phenolic. The butt cap is preceded by a buckhorn Hoppe ring that is underpinned with phenolic. The cue has a thick black phenolic ring on the butt side of the joint. The joint is buckhorn faced and underpinned with black linen phenolic. It matches the black linen phenolic joint collars on the shafts. It comes with 2 RAVEN tapered hard rock maple shafts. Unfortunately the original label had to be removed to thin the butt. Two of the points are about 1/4 inch lower than the other two.


You may choose any cue case (or other merchandise) from Our Discount Internet Store (up to $150.00) and get it free with the purchase of this cue.

    Specifications:
  • 58.5 inches
  • 19.4 ounces
  • Aluminum Radial pin
  • Flat faced
  • 12.4 mm at tip
  • Buckhorn ferrules
  • Red fiber pads
  • Triangle tips

Sold









Below are pictures of the cue before it was converted.






Back to Cues

To RAVEN Cues Home Page