Billiards Speak

Below is an example of what they are like. 

FAL13 

Tip: 13mm Triangle Ferrule: Aegis linen.  Shaft: hard rock maple with a 13 to 14″ taper Joint: Stainless steel, piloted with brass insert Pin: 5 16/14 stainless steel.  Rings: Four black plastic and silver rings.  Forearm: Birdseye maple stained gray with six ebony points alternating high and low, each point contains two diamond shaped ivory inlay. Wrap: Irish linen, black with white specs.  Sleeve: Black phenolic resin (plastic) with ten elongated opposing diamond shaped ivory inlays and five regular diamond shaped ivory inlays, with five colobolo dots inlayed. Bumper: black rubber- pushes in secured by a screw. Falcon cues have a changeable weight system. It is possible to change the weight up to an ounce.

Below is an example of what they are like. 

Predator 5K8

 Tip: 12 ¾” Medium Tiger Everest Ferrule: Proprietary plastic, poured into a mold Shaft: 314 Second Generation shaft, 29″ long with a 15″ pro taper, spliced hard rock maple Collar: Black proprietary plastic with one silver ring Joint: Stainless steel, piloted with a brass insert Pin: uni-lock® quick release, stainless steel Forearm: Ebony forearm with six floating snakewood points outlined with micarta and micarta diamonds. Rings: Four nickel silver rings Wrap: Irish linen, black Sleeve: Ebony sleeve with six snakewood windows outlined with micarta and micarta diamonds Butt Plate: linen based white plastic stamped with the “Predator” logo Bumper: Black rubber, push in.

The McDermott cues have been added.  Below is an example of what they are like.  

Navigator II

Tip: Medium Hard Triangle made from special Water Buffalo, Chrome Tanned leather, Ferrule: Fine Weave Linen-based Ivorine 3, hand glued and screwed, Shaft 29” Hand Selected North American Hard Rock maple; 10” to 12” Pro taper; turned 11 times , Collar: Impact Control Ring made from a proprietary Polymer Matrix Composite (PMC), Joint: Stainless steel Quick Release, Pin: Heavy gauge stainless steel 3/8×16, Forearm: West African Ebony with 4 West African Ebony, recon. ivory and Bacote points; 56 separate inlays!, Rings: 8 European nickel silver rings, Wrap: Top-grain, “Lizard” embossed, black leather, Sleeve: West African Ebony with 48 West African Ebony, recon. ivory and Bacote inlays, Bumper: Soft Durometer Polymer Composite, Butt Construction: Tri-Core (3 piece), Weight System: Interchangeable, Warranty: LIFETIME, including warpage.

The Medici cues have been added.  Below is an example of what they are like.

MED06

Tip: 12 3/4mm Medium-hard Lepro tip. Ferrule: Polycarbonate ferrule for a soft hit. Low deflection ferrule & tip combination Shaft: Hard rock maple (29″ long). With Meucci Pro Taper Joint: Flat faced wood-to-wood. Ivory toned with aluminum polished ring w/ black off set Pin: 5/16×18 Forearm: Curly Birdseye maple, black with ivory toned points. 6 Ivory toned rectangle inlays with diamond shaped paua shell inlays encased by polished aluminum rings Wrap: Covered black Irish linen with white specs Sleeve: black with ivory toned inlays surrounded by polished aluminum rings 6 Ivory toned rectangle inlays with diamond shaped paua shell inlays encased by polished aluminum rings Standard finish: Fire-proof urethane coating - Including the wrap. Butt Plate: Ivory toned with black Medici emblem Bumper: Basic push in rubber bumper